Overview

A high performance acrylic primer and undercoat formulated using 100% acrylic polymer resin to provide a high level of durability, adhesion and water resistance. Ideal for both interior and exterior use it provides adhesion to most substrates as well as providing a suitable base before applying water or solvent based enamels.

Formulated as a three coat system using Aqua Advanced Paint in eggshell, satin or gloss as the first coat. Designed with the trade decorator in mind the requirements of a top quality trim paint have been fulfilled.

• Fast drying - only 30 minutes
• Excellent adhesion to most surfaces
• Formulated using 100% Acrylic polymer resin
• Sprayable for large area application

Preparation

For the best results always thoroughly prepare the surface. Ensure the surfaces to be painted are clean dry and free from dust, dirt, grease and wax.

• On previously painted and glossy surfaces remove all loose or flaking paint and rub down with an abrasive paper.
• Areas affected by mould should be treated with a suitable .
• Bare steel - remove any rust and dirt and apply .
• Pressure treated timber - should be weathered for at least six months prior to painting.
• Weathered wood - should be abraded to allow for maximum penetration.
• New planed, finished wood or PSE wood - should also be abraded to open the grain and allow maximum penetration.
• Block any staining or any knots with .

Application

We always recommend to test a small inconspicuous are to ensure you are happy with the finished results.

• Stir well and only apply when temperatures are above 8°C.
• Apply by brush, roller, conventional H.V.L.P or airless spray, do not over spread.
• Spraying will considerably reduce the coverage rate depending on the type of spray equipment used.
• In most applications you will only require one coat.

We recommend to finish decorating with Bedec Aqua Advanced , or .

Aftercare & Storage